Look through the Style1 Cabinets and customer photos, The same variation in size and number of shelves apply.

Size limitations relate to :
a) The overall maximum packaged dimensions and weight set by the carriers. See Delivery info. If you can collect, larger versions can be made.
b) Side hinged door versions should not be longer along the base than 24" otherwise the weight of the door may cause it to sag on the hinges over time.For top or bottom hinged and lift-off doors this is not a problem.
c) Shelf depth. This is the depth between the door glazing and the rear panel of the cabinet. The maximum is 4" but 3" or less is not unusual.

Doors. There are several options as to how they can be fitted but the style of door is the same throughout.
Hinged doors can be made to hinge on either side or if you wish, top or bottom.
If space is limited a lift-off door may be an option for you.
Door catches are brass of the twin ball type.
The number of hinges and catches will vary according to the size of cabinet.

Shelves. The cabinet base should be counted as the first shelf. Up to 5 shelves are included in the price. You may have less shelves or more to choice.
The thickness of each shelf is approximately 12mm (1/2")

Glazing is 4mm crystal clear acrylic for maximum safety and less weight than glass.

Locking doors available at additional cost.

Plinths. It would be necessary for plinth versions to be secured at the top rear to prevent tilting forward when the door is opened.

Price per cabinet is given below in 3 size groups by L + H (Length plus Height or Width plus Height whichever way you wish to call it).

PLEASE NOTE: **** The maximum length plus height (L+H) for the largest cabinet available, delivery by carrier, is 65" e.g. 40" high x 25" wide, 36" high x 20" wide or any other combination where the length + height is more than 50" but no greater than 65" would be priced as given for 65" in the table above
The length and height of a cabinet is measured across the outer edges of the side frame. This does not include a 10mm (3/8") all round overlap for the door. Where 2 or more cabinets are to be mounted side by side and you do not want a gap between each or, where a cabinet has to fit in an alcove or other tight space, please ensure you specify this when obtaining your quotation.
If it is the internal width that is critical please so advise. .
Cabinet depth is taken as being the space behind the door to the rear of the cabinet.
Kindly allow up to 1/4" (5mm) overall for variation at manufacture.